Performance evaluation of venturi aeration system

The venturi aeration is an effective practice to increase the dissolved oxygen accessibility in the water bodies. This study aims to optimize the various geometrical parameters of the venturi aeration system. A non-dimensional technique was applied to find the optimum performance of various geometric parameters i.e. throat lengths (t_l), number of air holes (N), and converging and diverging angles (α and β). These experiments have been carried out using 1124 L capacity of tank having dimensions of 105 cm long, 105 cm wide and 102 cm deep. The experiments were conducted at a constant flow velocity of water (1.096 m/s) with varying throat length (t_l = 20–100 mm keeping 20 mm as interval between two consecutive length), number of air holes (N = 1–17 at an equal hole to hole distance of 5 mm between them), and converging and diverging angles (α and β = 10°, 15°, 20° and 25°). Multiple non-linear regression equations were also developed from the linear relation with the dependent variable (Non-dimensional form of standard aeration efficiency, NDSAE) and independent variables (t_l and N). With the geometrically optimized venturi aerator the optimum performance was found for t_l =100 mm, N = 17, and α and β = 15°. The maximum value of standard oxygen transfer rate (SOTR) and standard aeration efficiency (SAE) obtained was 0.0216 kgO₂/h and 0.611 kgO₂/kWh respectively. From the non-dimensional study, it was found that the NDSAE is the function Reynolds number (Re) and Froude number (Fr). The simulation equations were developed on the basis of Re and Fr for NDSAE, and subjected to 7.378 × 10⁻⁶ < Re < 3.689 × 10^-5 and 0.163 < Fr < 0.817, respectively.     

经济林良种推广现状及政策建议

经济林良种是经济林产业的“芯片”,是经济林生产优质、高产、高效的物质基础。完善经济林良种推广政策,是实现经济林产业高质量发展的根本保障。通过数据收集和整理,系统梳理全国经济林良种推广现状,指出经济林良种推广中还存在着良种使用率不高,经济林低产低效;部分经济林良种存在超范围推广;良种审定过多,结构性过剩和种植品种过多,对接生产加工不畅等突出问题。进而提出从以种植为目标的良种推广转变为以生产加工等市场需求为导向的良种推广思路。从优化良种供给、加强良种推广的宏观指导、强化科技支撑和宣传培训、实施经济林提质增效工程和充分发挥产业协会、创新联盟的作用等方面给出优化经济林良种推广的政策建议。     

西藏日喀则地区牧草供需研究

本研究采用供需计算公式分析日喀则地区牧草供给量和需求量，用供需差值计算法计算牧草供给缺口，同时据此预测未来10年日喀则地区的牧草需求量及缺口，以期为促进该地区牧草产业发展提出建议。结果表明：2000-2019年，日喀则地区牧草供不应求，缺口较大，最大为222.87万t，最小为132.88万t。未来10年的牧草需求和缺口预测数据表明：日喀则牧草需求量维持在300~400万t之间，缺口虽呈逐年减小的趋势，但数值依然较大。因此，本研究从自然环境、制度政策、经济发展三个方面提出建议，为解决牧草供需矛盾提供有效依据。     

国内外有机肥标准对比及风险评价

中国是人口最多的发展中国家，生产生活中产生的有机废弃物数量巨大，堆制有机肥是降低有机废物污染风险的重要方式，而有机肥标准则是防止有机肥成为新的土壤污染源，规范有机肥产业健康发展的重要保障。目前我国有机肥不合格现象时有发生，针对有机堆肥的标准仅有一个8年前的行业标准（NY 525—2012）的现状，本文对比了中国、日本、澳大利亚、欧盟、美国有机肥标准的重要指标，对存在的重金属残留、抗生素污染、病原体污染、营养富集及土壤盐渍化等有机肥质量安全风险问题进行分析，为我国有机肥行业未来绿色、健康、可持续发展提出建议。尽管我国现有有机肥质量标准，在具体指标要求方面优于美国，但和欧盟相比还有差距，比如我国重金属Cu、Zn、Ni限量缺失，对Cd等重金属限值要求不够严格，长期施用会导致土壤重金属含量超过风险筛选值，严重影响农作物安全；同时，由于部分畜禽养殖业不合理使用抗生素，加之有机肥生产企业技术的欠缺，农户施用时缺乏指导，监管部门执法不严等因素，我国有机肥施用过程存在较大风险隐患。因此，进一步完善有机肥标准体系，强化对原料中有毒有害物质的限制，要求选用原料批批检，加大准入和过程的落实力度，才能保障我国有机肥产业有序健康发展。     

大棚蔬菜滴灌系统案例设计与分析

选取大棚蔬菜种植园为实例,根据当地的水文地质特征、水源条件、大棚分布以及蔬菜种植结构,详细计算并校核了滴灌系统的总体分布、灌溉均匀度、允许灌溉强度、设计湿润比、灌水器选择、毛管极限长度等设计标准参数。通过灌溉制度的制定,计算各级管道管径、水头损失,选择过滤器,确定水泵型号,完成了滴灌系统的整体设计。该滴灌设计案例分析过程详细,结果合理,可作为相关滴灌工程设计参考依据。     

沙地衬膜水稻品种筛选试验研究

为筛选适合科尔沁沙地衬膜种植的优良水稻品种,特选取吉特639等8个品种进行对比试验研究,结果表明,吉特639表现最优,产量高达526.7 kg/667 m2。其次是稻花香2号、吉粳88,平均产量分别为505.7 kg/667 m2和504.1 kg/667 m2。而且米质好、口味佳,均可作为沙地衬膜水稻品种进行大面积推广种植。     

Soil biodiversity and DNA barcodes: opportunities and challenges

Soils encompass a huge diversity of organisms which mostly remains to be characterized due to a number of methodological and logistical issues. Nonetheless, remarkable progress has been made in recent years toward developing strategies to characterize and describe soil biodiversity, especially thanks to the development of molecular approaches relying on direct DNA extraction from the soil matrix.Metabarcoding can be applied to DNA from any environment or organism, and is gaining increasing prominence in biodiversity studies. This approach is already commonly used to characterize soil microbial communities and its application is now being extended to other soil organisms, i.e. meso- and macro-fauna.These developments offer unprecedented scientific and operational opportunities in order to better understand soil biodiversity distribution and dynamics, and to propose tools and strategies for biodiversity diagnosis. However, these opportunities also come with challenges that the scientific community must face. Such challenges are related to i) clarification of terminology, (ii) standardisation of methods and further methodological development for additional taxonomic groups, (iii) development of a common database, and (iv) ways to avoid waste of information and data derived from metabarcoding. In order to facilitate common application of metabarcoding in soil biodiversity assessment, we discuss these opportunities and challenges and propose solutions towards a more homogeneous framework.     

深圳市道路绿化管养标准体系构建浅析

城市道路绿化在改善城市生态环境、提升市民生活质量方面有重要作用。在道路绿化中，管养工作是维持道路绿化活力的重要内容。通过考察研究深圳市以及其他省市的道路绿化管养标准体系，分析对比每个城市的道路绿化管养标准体系现状，指出了深圳市道路绿化管养标准体系具有建立较早、内容较为全面的优势，以及存在体系架构不健全、部分标准标龄过长、可量化执行标准较少等方面的不足。并从系统性、指导性、先进性角度提出优化建议，将深圳市道路绿化管养标准体系划分为基础标准和道路绿化管养通用标准两大部分，其中基础标准分为术语标准等4个大类，道路绿化管养通用标准划分为质量技术等14个类别。     

橡胶品种对东方真叶螨实验种群发育及繁殖的影响

为探明不同橡胶品种对东方真叶螨发育及繁殖的影响,在温度(27±1)℃、相对湿度(70±5)%、光周期L∶D=12 h∶12 h的室内条件下,观察了东方真叶螨在IAN873、热研7-33-97、PR107、热研7-20-59、云研77-4、GT1、RRIM600等7个橡胶品种上的发育历期、存活率和产卵量,并组建了其种群生命表。结果表明:世代发育历期以GT1最长,为10.69 d,以云研77-4最短,为10.29 d;世代存活率主要由卵期的存活率决定,除PR107上的存活率为89.09%外,其余均在93.00%以上;产卵量以GT1上最多(45.47粒),而RRIM600上最少,仅为22.56粒;净生殖率R0、内禀增长率rm和周限增长率λ均以GT1上的为最高,分别为27.021 1、0.224 5、1.251 7,在RRIM600上的最低,分别为16.616 8、0.203 8、1.226 0。初步认为GT1是最适宜东方真叶螨的发育与繁殖的品种,而RRIM600是最不适合该螨发育与繁殖的品种。     

泡核桃主栽品种花粉形态研究

本文选取7个泡核桃主栽品种,利用扫描电子显微镜在1300倍下观察花粉粒形态,9000倍观察萌发孔和外壁纹饰。结果表明,7种泡核桃品种均属单粒花粉,花粉形态一致,为近球形,表面布有萌发孔,外壁纹饰为颗粒状雕纹,与同科同属新疆栽培的普通核桃形态相似,与同科不同属的山核桃形态存在很大差异,且不同泡核桃品种间的花粉和萌发孔大小等存在显著差异或极显著差异,以此可作为泡核桃品种鉴定、划分和判断亲缘关系远近的依据。